Carpeted Floors
It’s best clean carpets on a regular basis. We have all the necessary equipment to clean office carpet easily, even when it comes to getting out stubborn stains. Carpets that receive a lot of wear require a thorough and daily vacuuming to prevent dirt and soil from becoming ground into the carpet fibers. We offer many different methods to clean carpets:
- Absorbent Pad: The Carpet is pre-sprayed with a detergent solution; a rotary floor machine fitted with a special soft absorbent pad that goes over the sprayed areas to absorb surface soil and gives the carpet a uniform appearance. This method is used as an interim or primary cleaning method.
- Spot Cleaning: We have a spotting kit which allows the cleaning technician on site to be prepared to remove certain types of soiled areas on the carpet fibers. There are times when the spot removal methods do not always totally remove the stains and will only lighten them on the surface and usually restorative cleaning is required.
- Water Extraction: Hot water containing a cleaning product, is injected into the carpet and followed with a vacuum that extracts soil. This approach works best with high temperature, good chemical concentration, and proper pre-spray solutions. This process is usually used as a restorative cleaning method.
- Rotary Shampoo: A rotary floor machine, nylon bristle brush, and solution tank is used for this process. The chemical solution is fed through the machine and down through the brush and worked into the carpet. Best followed with the hot water extraction method because the suspended soil is then removed from the carpet fibers.
- Dry Foam: The carpet cleaner applies shampoo to the carpet, which allows it to dry, and then without rinsing, we use a vacuum to remove the dried shampoo. The foam is produced before hitting the carpet, worked in with the brushes and then extracted with a vacuum system.
- Absorbent Compound: This system uses an absorbent particulate product that is impregnated with cleaning solutions and solvents. The powder will release the chemical cleaner into the soil, which is then emulsified and suspended. The powder sets between 15 minutes to 1 hour and then the carpet is vacuumed.
Hard Surface Floors
- Stripping and Waxing: Although hard surface floors can be extremely durable, they require proper maintenance to preserve their resilience and luster. With our customized floor maintenance program, we can protect your company’s floor, and keep it looking like new. High traffic areas are prone to dirt and grit. Dirt and grit can cause scratches and nicks and damage your floors permanently giving your beautiful floor a less-than-professional look. We can remove your floor’s old sealer and finish, reseal it with a high-quality all in one sealer and finish and buff the surface to a deep shine. This sealer and glossy finish will extend the wear of your floor, reduce scuff marks and scratches and guard against soil penetration and abrasion.
- Grout Cleaning and Sealing: We start by coating the entire floor, tile and grout, with our commercial grade low-odor non-toxic chemical that loosens the accumulated dirt, grease, and topical residues from the grout lines and tile surface. After proper dwell time, we work the solution into the grout lines with a stiff brush, as well as on top of the tile surface. Using high pressure hot water, we are able to wash, rinse and extract years of soil and grease from the pores of the tile and grout. You will find that our process restores the grout, in most cases, 85 to 90 percent of its original appearance. Some stains will not come out because they dye the grout, but the combination of heat, water pressure and suction removes most. Once dry, it is time to seal the grout. The sealer will make the grout uniform in color and virtually stain proof.
Keep your floors clean. Do not underestimate the value of routine mopping—both dry mopping and damp mopping. Daily maintenance is the key to long lasting floors that look great for many years. If floors receive less attention—they are likely to require more frequent restorative maintenance.
Tile and Grout
Grout Cleaning and Sealing: We start by coating the entire floor, tile and grout, with our commercial grade low-odor non-toxic chemical that loosens the accumulated dirt, grease, and topical residues from the grout lines and tile surface. After proper dwell time, we work the solution into the grout lines with a stiff brush, as well as on top of the tile surface. Using high pressure hot water, we are able to wash, rinse and extract years of soil and grease from the pores of the tile and grout. You will find that our process restores the grout, in most cases, 85 to 90 percent of its original appearance. Some stains will not come out because they dye the grout, but the combination of heat, water pressure and suction removes most. Once dry, it is time to seal the grout. The sealer will make the grout uniform in color and virtually stain proof.